Quick answer
A brake pedal that sinks or barely slows the car is an emergency. Here's how to stop as safely as possible.
Complete brake failure is rare, but a soft, sinking, or weak brake pedal is more common than people think. Knowing what to do can keep a scary moment from becoming a crash.
If the Pedal Goes Soft or Sinks
- Pump the brake pedal firmly and quickly; it can build up some pressure in a failing system. (If your car has anti-lock brakes and they're working, press firmly and steadily instead.)
- Downshift: shift to a lower gear to use engine braking. In an automatic, use the low gear or manual mode if the car has one.
- Use the parking brake gradually: pull or press it slowly and steadily. Yanking it hard at speed can lock the rear wheels and cause a skid.
- Turn on your hazards and use your horn to warn other drivers.
- Steer toward a safe area: an uphill road, an open lot, or a shoulder. As a last resort, rubbing the side of the car gently against a guardrail can slow it.
Don't turn the engine off; you'll lose power steering, and the steering may lock.
Warning Signs Before Failure
- A brake warning light on the dash
- A soft or spongy pedal, or one that sinks slowly when held
- Grinding or squealing when braking
- The car pulling to one side when braking
- Fluid leaking near a wheel
Never Drive a Car With Brake Problems
If your brakes have failed, felt wrong, or the brake light is on, don't drive the car to the shop, even if it's close. A tow is the only safe way to get it there. If any wheel locks or drags, we'll use a flatbed.
Brakes feel wrong? Don't drive it. Call KO Towing & Recovery at (714) 766-1669, 24/7.